CP Industries is certified to manufacture seamless pressure vessels used for stationary ground storage applications. The majority of U.S. States require these vessels to be manufactured in accordance with the American Society of Mechanical Engineers (ASME) Boiler and Pressure Vessel Code for unfired pressure vessels, Section VII, Divisions 1 (including Appendix 22), 2 and 3.
To View CP Industries’ ASME certificates, please click one of the following:
U Certificate of Authorization
U2 Certificate of Authorization
U3 Certificate of Authorization
R Certificate of Authorization
National Board Certificate of Authorization
High-pressure cylinders for on-board vehicle storage of CNG used in Canada are required to be manufactured in accordance to the Canadian Standards Association (CSA) Specification B51-09 Part 2. CP Industries’ Type 1 and Type 4 cylinder designs are registered with Technical Standards and Safety Authority (TSSA) in compliance with the aforementioned specification. With this CRN, our cylinders are approved for use in a number of Canadian provinces.
To view CP Industries’ Type 1 and Type 4 certificates, please click one of the following:
Type 1 Ontario Certificate
Type 1 Alberta Certificate
Type 1 Manitoba Certificate
Type 4 Ontario Certificate
Type 4 Alberta Certificate
Type 4 Manitoba Certificate
Type 4 British Columbia Certificate
Type 4 16” Full Carbon Ontario Certificate
CP Industries has completed the audits and processes to register the management system procedures and processes in accordance with ISO 2001:2015
DOT UN ISO 11120
CP Industries has received approval for the manufacturing of large seamless tubes to ISO 11120 with certification to the UN Model Regulations for the Transportation of Dangerous Goods by the Notified Body of the United States (USDOT). The ISO 11120 tube with UN/USA approval has the flexibility of the ISO 11120 design standard allowing the design of a UN tube to be optimized for a specific gas service.
CP Industries has received approval for the manufacturing of Type IV fully wrapped carbon fiber composite cylinders to ISO 11119-3:2013 with certification to the TPED 2010/35/EU, ADR2015 and CDG 2009 Regulations. These cylinders have been approved for use in ADR certified MEGC’s.
Seamless pressure vessels used for transportation to and in Canada are required to be manufactured to the Canadian Standards Association (CSA) Specification B-339. CP Industries has received approvals from Transport Canada (TC) to manufacture vessels to the TC-3AAM, TC-3AAXM and TC-3TM Specifications contained in CSA B-339. Similarities between the TC Specifications and the equivalent DOT specifications allow CP Industries to dual certify vessels for use in both the U.S. and Canada.
CP Industries is licensed by the Chinese government to manufacture pressure vessels as well as fabricate and assemble trailers and skids.
CP Industries is licensed by the Korean Gas Safety Corporation to manufacture vessels for service in Korea.